Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
360° drag to look Walk our plant before you order Six interactive panoramas inside our 10,000 m² plant in Dongguan — aerial view, gate, office and three production workshops. Open the 360° tour → Aerial Panorama Company Gate Our office Workshop Workshop for new product Workshop
Automatic screw driving & dispensing machines

Screw driving and dispensing machines built around your assembly line

Two lines make up most of what we build: automatic screw driving machines and automatic dispensing machines for glue, sealant and potting. We also build soldering, labeling, robotic cells and custom non-standard automation — as a manufacturer in Dongguan, China since 2011. Every machine is configured to your product, your torque or shot size and your cycle-time target before it ships.

2011MANUFACTURING SINCE
10,000 m²PLANT · 8,000 m² ASSEMBLY
3,000+CUSTOMERS SERVED
CE / KC / ULCERTIFIED RANGE
Two core product lines

Screw driving and dispensing — the two lines we build deepest

Screw driving is our core business; dispensing is the line customers most often pair with it. Both are configured to your part, your torque or shot size and your cycle time — not sold from a catalogue.

Also available

Complete the line

The neighbouring stations we also build. Many customers add one of these once the screw driving and dispensing cells are running.

Turnkey line building

Your line has four stages. We cover nine of the fifteen stations.

Buying one machine solves one station. Most of our customers are filling a gap in a line that already runs, so the useful question is not “what do you make” but “which station am I missing”. The process map lists every station in order — and says plainly which ones are our own build and which we source to your print.

Why buyers choose us

Not a catalogue seller — a machine builder

01

Configured to your part

Fixture, screw feeder, torque profile and cycle time are set for your product before delivery — not a stock unit with your name on it.

02

Data that survives an audit

Smart screwdrivers connect over Ethernet or Wi-Fi and upload tightening data to MES. Tamper-proof records, missing-screw detection, automatic re-tightening.

03

Vision where it pays off

CCD vision locates the screw point and programs itself, so changing to a new board or housing does not mean re-teaching the machine by hand.

04

Support in your time zone

Our Vietnam branch serves Southeast Asia directly. For North America and Europe we ship pre-tested, pre-programmed machines and support commissioning remotely.

Key specifications

Common platform data

These figures apply across our automatic screw driving platforms. Dispensing platforms are configured to the material and shot size you need — tell us the adhesive and we will quote the valve, metering and axis configuration. Exact values are confirmed on the datasheet for your configuration.

ParameterValue
Screw size rangeM1.7 – M5.0
Locking range (X × Y × Z)500 × 400 × 100 mm
Repeat positioning accuracy±0.02 mm
Standard cycle time (arm)0.37 – 0.41 s / screw
Payload4 kg — 5 kg downward positioning
Moving speed0.1 – 800 mm/s per axis
DriveStepper / servo motors (Japan)
TransmissionTiming belt and/or precision linear guide
Power supplyAC 220 V, 50 Hz, single phase, 1.5 kW
Working air pressure0.4 – 0.6 MPa
Protection ratingIP40
Control optionsEPSON controller / PLC / PC control / teach pendant
CBZIN production floor in Dongguan, China CBZIN certifications and qualifications
Industries

Where our machines run today

Any assembly step that repeats a screw, a dot of glue or a solder joint is a candidate — including the optical, server, power and thermal assemblies behind the current AI hardware build-out.

Commercial models

Three ways to get a machine

Purchase

Standard supply of a configured machine, with spare parts and remote commissioning support.

Rental

Short-term rental for seasonal peaks or trial production before committing capital.

Lease to purchase

Monthly payments that build toward ownership, with the term and end date agreed in writing before delivery.

Contract manufacturing is also available for customers who prefer to buy finished sub-assemblies.

Send us your part, screw or adhesive specification

Tell us the product, the screw or the adhesive, and the cycle time you need. We will come back with a suggested screw driving or dispensing configuration and a quotation, usually within one business day.

Common questions

Frequently asked questions

Buyers usually ask these before requesting a quotation. If yours is not here, just write to us.

What is your lead time?
Standard machines ship in 7–10 days. Custom non-standard machines take about 20 days from approved drawing to shipment. Both figures run from drawing approval, not from the enquiry date.
What is your minimum order quantity?
One machine. There is no minimum order quantity — a single machine is a normal order, and it goes through the same configuration and pre-shipment test as a larger one.
How many machines can you build per month?
About 300 machines per month, assembled on an 8,000 m² assembly floor inside a 10,000 m² plant in Dongguan, Guangdong.
Can we test our own parts before we buy?
Yes — sample testing is free. Send your parts and screws to our plant in Dongguan and we run them on the matching platform before you commit to an order.
What screw sizes can your machines drive?
M1.7 to M5.0. That covers the large majority of electronics, appliance and automotive assembly joints.
How accurate is the screw placement?
Repeat positioning accuracy is ±0.02 mm on our automatic screw driving platforms, so torque and position stay consistent across a shift.
How fast can a machine drive a screw?
Standard cycle time on the robot arm platform is 0.37–0.41 seconds per screw. Exact figures depend on stroke length, screw and fixture.
Can the machines connect to our MES?
Yes. The smart screwdrivers connect over Ethernet or Wi-Fi and upload tightening data — torque, angle and result — as tamper-proof records, which is what plant quality departments normally require before a machine goes on the line.
What happens if a screw is missed?
The machine detects it and automatically re-tightens. Float-height detection via a displacement sensor catches cross-threaded or proud screws, and defects raise a real-time alarm instead of passing down the line.
Why does the feeder keep jamming?
Usually the screws rather than the feeder — burrs on the head, bent shanks or damaged threads. Check a sample from the incoming box against a new batch before adjusting the feeder. Vacuum pick-up has the fewest moving parts and jams least, but it is limited by screw weight and head geometry.
How does the machine stop a cross-thread before it damages the part?
By monitoring torque against angle during run-down, and by checking seating with a displacement sensor. A screw that reaches torque after very little rotation is flagged and reversed out before the thread is cut. Fixture alignment matters as much as machine accuracy: an operator absorbs misalignment by hand, a machine reproduces it every cycle.
Which certifications do your machines hold?
CE, KC and UL for the applicable product ranges. We confirm exactly which certificates apply to the machine you are buying, and can supply the documents before you place an order.
Can you build a custom or non-standard machine?
Yes — that is a large part of what we do. We design the machine, write the PLC, touch-screen HMI and control-board software, then build and commission it.
Where are the machines manufactured?
In our own 10,000 m² facility in Dongguan, Guangdong, China. The company has manufactured automation equipment since 2011.
Do you support customers outside China?
Yes. Our Vietnam branch handles delivery, commissioning and after-sales for Southeast Asia. For North America and Europe we ship machines pre-tested and pre-programmed, with remote commissioning assistance.
Can we rent instead of buying outright?
Yes. Besides outright purchase we offer short-term rental for seasonal peaks or trial production, and lease-to-purchase where monthly payments build toward ownership.
What materials can your dispensing machines handle?
Adhesives, sealants, silicone, UV-cure resins and potting or encapsulation compounds. We match valve, reservoir and metering to the material you actually use, including two-part materials that need metering and mixing.
Do you build dispensing machines for board-level sealing?
Yes. Our inline dispensing platforms are used for board-level and enclosure sealing, with dispensing synchronised to the line takt and optional vision positioning.
Technical resources

By application, by market, and how-to guides

Twenty-six pages written for engineers specifying a screw driving station — not product brochures. Free, no sign-up.

-->