At a glanceNon-standard screw driving, dispensing and assembly cells
· ~20 days from approved drawing · MOQ one machine
· quoted so far up to 12 m stroke and 8,000 × 2,500 mm panels
· built in Dongguan since 2011
Three of the last four enquiries we received were not for a catalogue machine. They asked for a 12 m rail, an 8,000 × 2,500 mm vertical panel, and a low-cost pneumatic multi-spindle cell for a 100K/month programme. None of those exist as a standard product, so this page states the boundary instead of implying we build everything.
| Requirement | What we do |
|---|---|
| Stroke beyond the bench envelope | Long-stroke gantry. Quoted: 12 m rail with 2,500 mm vertical travel. |
| Part larger than 500 × 400 mm | Floor-standing frame or gantry. Quoted: 8,000 × 2,500 mm vertical panel. |
| Throughput above one head | Dual-head / dual-platform, or multi-spindle. Quoted: low-cost pneumatic multi-spindle SPM for 100K/month. |
| Curved or compound bead path | Four- and five-axis dispensing, needle kept normal to the surface. |
| Traceability required | Servo torque control with per-screw curve, missing-screw detection, MES upload. |
| Mixed product on one line | Recipe library per product; changeover by program, not by mechanical adjustment. |
The three enquiries behind this page all arrived with the part already designed, which is why they could be answered in days rather than months. If your part is still open, send the screw or bead layout first — the machine follows the layout.