Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
Home/Guides/CB-LS1044-QS multi-axis screw locking machine
Technical guide

CB-LS1044-QS multi-axis screw locking machine

A multi-axis screw locking platform measuring 1000 × 400 × 100 mm and weighing 160 kg packed. It fastens 2,000–3,000 screws per hour at 1.0–2.5 seconds per screw, with repeat positioning of ±0.02 mm and locking precision of ±0.05 mm, on AC 220 V and 0.4–0.6 MPa air.

At a glanceType and model Multi-axis screw locking machine, model CB-LS1044-QS, PLC control with a touch-screen HMI, aluminium alloy frame. · Size and weight 1000 × 400 × 100 mm body; 160 kg packed in a wooden case.

Most engineers arriving here go straight to one of these:

Technical guide

This is a multi-head platform rather than a single-spindle bench unit: several heads fasten at the same time, the cycle is run by a PLC, and the operator works from a touch screen. The frame is aluminium alloy, which is why the machine holds 1000 × 400 × 100 mm at 160 kg packed instead of the several hundred kilos a cast-iron gantry of the same envelope would need. Published applications are medical device assembly, toy production, auto parts, home appliance assembly and 3C electronics.

The working numbers are: screw range M1 to M8 with tooling, with M1 to M5 being the range most production actually runs in; 2,000 to 3,000 fastenings per hour at the platform level, or 1.0 to 2.5 seconds for an individual screw depending on thread, length and how far the head has to travel; AC 220 V 50 Hz single phase; and 0.4–0.6 MPa of clean, dry air. The drive is a Japanese micro-stepping motor through a synchronous belt and precision linear guide.

Two different accuracy figures are published for this machine and they are not interchangeable. Repeat positioning is ±0.02 mm on the screw axis (±0.05 mm through the belt), and locking precision is ±0.05 mm. The first says the head returns to the same point every cycle; the second says the fastening result itself varies by no more than 0.05 mm. Buyers routinely compare quotations on the smaller number alone, which is how a machine gets sold as “±0.02 mm” and then fails an incoming inspection that measures the joint, not the axis.

Program storage is 100 groups of 40 points each. For a product with more than 40 screw positions that ceiling matters: plan the positions across program groups, or confirm the split with us against your part before the order rather than after the fixture is built. For mixed-model lines the grouped programs are the main reason changeover is a screen selection instead of a re-teach.

Packed weight is 160 kg in a wooden case, so plan a forklift or a pallet truck at the receiving end and check the doorway and lift dimensions on the way to the line. Packing dimensions are confirmed per order rather than fixed, because the crate depends on the fixture that ships with the machine.

Certification is ISO and CE, warranty is 12 months, and after-sales is remote coaching or an on-site visit. HS code 8515190090 applies to the platform; the origin is Dongguan, Guangdong, and the minimum order is one set.

Assembly floor in Dongguan where the screw locking platforms are built and run before packing.
The assembly floor in Dongguan, where these platforms are built and run before they are packed.

Last updated 2026-11-20. Screw range, torque and cycle-time figures reflect the current published platform specifications.

What to specify

Key points to take away

The practical conclusions from the sections above.

Type and model

Multi-axis screw locking machine, model CB-LS1044-QS, PLC control with a touch-screen HMI, aluminium alloy frame.

Size and weight

1000 × 400 × 100 mm body; 160 kg packed in a wooden case.

Throughput

2,000–3,000 fastenings per hour platform-level; 1.0–2.5 s per screw depending on thread, length and travel.

Accuracy (two figures, not one)

Repeat positioning ±0.02 mm on the screw axis (±0.05 mm through the belt). Locking precision ±0.05 mm.

Utilities

AC 220 V 50 Hz single phase; clean dry air at 0.4–0.6 MPa.

Screws, certification, warranty

M1–M8 with tooling, M1–M5 in typical production; ISO and CE; 12 months.

Watch the machine run

A fastening cycle on the same platform series, filmed on the assembly floor in Dongguan — the fastest way to check the motion, the feed and the torque behaviour before you ask for a drawing.

Common questions

Frequently asked questions

What does the machine weigh, and how does it ship?
160 kg packed in a wooden case. Plan a forklift or pallet truck at the receiving end. Packing dimensions are confirmed per order because the crate depends on the fixture that ships with the machine.
What is the difference between repeat positioning and locking precision?
Repeat positioning (±0.02 mm here) is how closely the head returns to the same point each cycle. Locking precision (±0.05 mm) is how much the fastening result itself varies. Quoting the smaller number as the machine's accuracy is the most common way two machines get compared unfairly.
Which screws can it run?
M1 to M8 with the right tooling; M1 to M5 covers most production. Head form, shank length and coating decide whether a given screw feeds reliably, so the screw sample matters more than the thread callout.
What power and air does it need?
AC 220 V 50 Hz single phase, and clean dry air at 0.4–0.6 MPa. Wet or oily air is the usual cause of feeding faults on this type of platform.
How many programs can it store?
100 groups of 40 points each. If your part has more than 40 screw positions, plan the split across groups and confirm it with us against the part before the fixture is built.
Keep reading

Related pages

Not sure which applies to you?

Describe the part and the joint and we will tell you which configuration fits — or whether you do not need a machine at all.