Home / Answers / Can a screw driving machine detect a missing screw?
Can a screw driving machine detect a missing screw?
Short answerYes. Our vision and servo models carry missing-screw detection with automatic re-tightening, and tightening data can be uploaded to MES so every screw has a torque record against the part serial number.
Detection is only half of it. The value is the record: when a customer audits a batch, 'we checked' is worth nothing and a torque curve per screw is worth a lot.
What decides it
- Detection methods differ: torque/angle monitoring, vacuum or air-pressure confirmation at the bit, and vision after driving.
- Automatic re-tighten closes the loop without an operator, which is what keeps the false-reject rate low.
- MES upload is optional; it needs a data path from the cell, which is a site question, not a machine question.
- Floating screws (cross-threaded and spun) are a different failure and need torque-angle monitoring, not just presence sensing.
Tell us which failure you actually get — missing, floating or wrong screw — because each needs a different sensing method.
Related: Screw driving machines · Automotive parts · Ask about MES upload