Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
Home/Guides/Automatic screw machine price
Technical guide

How much does an automatic screw driving machine cost?

Short answer: US$4,800 to US$5,300 for a bench-top single-station machine, US$9,350 to US$14,500 for a floor-standing or dual-platform cell, and from US$27,550 upward once the station has to be engineered into your line.

At a glanceBench-top, single station US$4,800 – US$5,300. One head, one platform, manual load. The entry point for a single product run at modest volume. · Floor-standing or dual-platform US$9,350 – US$14,500. Two heads and/or two platforms, so loading one while the other drives. Priced for continuous production rather than batches.

Most engineers arriving here go straight to one of these:

Technical guide

Those three bands are the figures these classes of machine are listed at in public supplier listings, not a quotation. We publish them because most buyers spend the first two emails trying to find out whether a machine is a five thousand dollar item or a fifty thousand dollar item, and that answer should not need a sales call. Treat the bands as the shape of the market, and the quotation as the answer for your part.

What moves the number is rarely the driver. The frame and the number of heads come first: a bench-top single-station machine and a dual-head dual-platform machine share a controller and a screwdriver, and differ by roughly a factor of two because of structure and fixtures. Second is the feed arrangement — vacuum pick-up for small heads and low volume, blow feed once a single screw type runs in real volume. Third is anything that has to be proven rather than assembled: CCD vision positioning, torque and angle monitoring, an interface to your MES. Those are the items that turn a listed machine into an engineered cell.

What is not included matters just as much. The fixture is specific to your part, so it is quoted from your drawing rather than from a price list. Freight, duties and the electrical adaptation for your site are separate. And nobody can quote a custom in-line station from a photo: it needs the part, the screw and the takt time, which is why the third band starts at a floor figure and says 'and up'. If you want to narrow the band before talking to anyone, send us the part and the screw — sample testing on the matching platform is free, and it is the cheapest way to find out which band you are actually in.

Last updated 2026-11-20. Screw range, torque and cycle-time figures reflect the current published platform specifications.

What to specify

Key points to take away

The practical conclusions from the sections above.

Bench-top, single station

US$4,800 – US$5,300. One head, one platform, manual load. The entry point for a single product run at modest volume.

Floor-standing or dual-platform

US$9,350 – US$14,500. Two heads and/or two platforms, so loading one while the other drives. Priced for continuous production rather than batches.

In-line or custom cell

From US$27,550 upward, quoted after engineering review. Sits inside your conveyor line; the price depends on the fixture and the integration, not on the machine alone.

Dispensing, for comparison

US$2,500 – US$5,000 bench-top; US$5,850 – US$8,550 in-line. Lower entry than screw driving because there is no feed system to build.

Soldering and labeling

Soldering US$5,000 – US$5,800 bench-top and US$8,550 – US$22,000 in-line; labeling US$12,650 – US$13,000. The spread on soldering comes from head count and whether laser assistance is involved.

Not in any band

Fixture, freight, duties, and site electrical adaptation. The fixture is the largest of these and is quoted from your drawing.

Common questions

Frequently asked questions

Are these your prices or the market's?
They are the bands these machine classes are listed at in public supplier listings — a market shape, not our quotation. Our quotation is built from your part, screw and takt time, and we will tell you which band it lands in before you commit to anything.
Why is a custom cell three times the bench-top price?
Because the machine is no longer the product — the integration is. An in-line cell needs a fixture matched to your part, transfer that matches your line, and often a data interface. Each of those is engineered once, for you.
Can I get to a number without a drawing?
Usually yes, to within a band. Tell us the screw size, how many screws per unit, and the units per hour you need. If it is borderline between two bands, the deciding factor is usually the feed arrangement, and we will say so.
Keep reading

Related pages

Not sure which applies to you?

Describe the part and the joint and we will tell you which configuration fits — or whether you do not need a machine at all.