Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
Home/Markets/Poland
Market & supply

Supplying automatic screw driving machines to Poland

Poland has become one of Europe's densest appliance, automotive-component and electronics manufacturing locations, and it specifies equipment on measured cost per assembled unit.

At a glanceBuild: 230 V, 50 Hz · Conformity: CE — Machinery Directive; EU declaration of conformity · Region: European Union

Most engineers arriving here go straight to one of these:

Market & supply

The electrical and compliance position is the same as the rest of the EU: 230 V 50 Hz, which is our standard build, and CE marking supported by a technical file and an EU declaration of conformity. No frequency adaptation is required, which removes the most common technical objection to a machine built outside Europe.

What distinguishes the Polish market commercially is the decision process. Many of the plants are operations of international groups with strict cost control, but with local engineering authority to specify equipment. That means the enquiry is usually technically competent — the buyer knows the screw sizes, the torque window and the takt rate — and the conversation is about cost per assembled unit rather than about brand.

That suits a direct manufacturer, and it is also where automation competes best. Polish labour costs have risen consistently, which shifts the cost comparison for a screw-driving station further in favour of the machine every year, and the appliance and automotive component sectors both run volumes where a station is justified on measured output rather than on headcount alone.

What to specify

What to confirm before you order

Market-specific details that change the build, the paperwork or the logistics — settle these at enquiry stage.

Standard electrical build

230 V 50 Hz needs no adaptation — order without a frequency conversion.

CE documentation

Technical file and EU declaration of conformity supplied with the machine.

Cost per unit

Prepare the cost-per-unit comparison; that is the argument that decides these projects.

Technical readiness

Expect detailed questions on torque window, takt and fixturing. Send drawings at first contact to shorten the cycle.

Manual language

Polish documentation for machines installed in Poland.

Common questions

Frequently asked questions

Does the machine need any adaptation for Poland?
No. 230 V 50 Hz is our standard build, and CE marking with the supporting technical file covers the compliance requirement.
Can you help with the cost comparison?
We work from the actual joint count per unit and the takt rate you need, so the comparison against manual assembly is based on your numbers rather than a generic claim.
Can you supply documentation in Polish?
Yes — the manual is supplied in the language of the country of use.
Keep reading

Related pages

Not sure which applies to you?

Describe the part and the joint and we will tell you which configuration fits — or whether you do not need a machine at all.