Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
Home/Markets/United States
Market & supply

Supplying automatic screw driving machines to the United States

The single most common technical surprise when buying a Chinese-built machine for the US is the frequency. 60 Hz is not a formality.

At a glanceBuild: 120 / 208 / 240 V, 60 Hz · Conformity: UL listed components; NRTL acceptable · Region: North America

Most engineers arriving here go straight to one of these:

Market & supply

Our standard machine is built for AC 220 V, 50 Hz, single phase. A US plant typically has 208 V or 240 V single-phase available at 60 Hz, so a machine shipped as-standard will not simply be plugged in. Two routes work: we build the machine for 60 Hz (different transformer, different parameter set in the control software, re-tested before shipment), or the machine is supplied 50 Hz and fed from a local rotary converter. We prefer to build for 60 Hz and we say so before the order rather than after arrival.

On compliance, the relevant expectation in most US plants is that the electrical components carry UL recognition or listing and that the panel is built to recognised practice. Our machines hold CE, KC and UL for the applicable ranges; we confirm which certificates apply to the specific model, and we supply the documents before you order rather than promising them afterwards.

Logistically, machines ship from Dongguan to a US port on a normal ocean schedule, and we pre-program the machine to the customer's part before it leaves so that commissioning on site is verification rather than programming. Where the application is standard, commissioning is handled remotely by video with our engineer driving the session; where it is not, we discuss a visit as a separate arrangement. Spare parts and wear items ship from stock rather than waiting for the next container.

What to specify

What to confirm before you order

Market-specific details that change the build, the paperwork or the logistics — settle these at enquiry stage.

Electrical build

Confirm 60 Hz up front. It changes the transformer, the control parameters and the factory test, and it is much cheaper decided at order than corrected on site.

Voltage available

Single-phase 208 V and 240 V are both common; give us the actual supply at the intended position rather than the nominal plant voltage.

Certification documents

Ask for the certificate numbers that apply to your model. We provide them before the order.

Commissioning route

Standard applications are commissioned remotely. Tell us at enquiry stage if your process needs an engineer on site.

Spares availability

Wear parts and screwdriver consumables are held in stock for direct shipment rather than consolidated with the next container.

Common questions

Frequently asked questions

Will the machine work on 240 V 60 Hz in the US?
Yes, if it is ordered as a 60 Hz build. We change the transformer, adjust the control parameters and re-test at the factory before shipment. A 50 Hz machine needs a rotary converter instead, which is a workable but inferior option.
Do the machines carry UL?
Our machines hold CE, KC and UL for the applicable product ranges. Tell us the model you are considering and we will confirm exactly which certificates apply and send the documents.
Can you support a machine in the US after delivery?
Yes. Standard applications are commissioned remotely, and machine data and programs can be inspected remotely for diagnosis. Contact us for the current arrangements for on-site support.
Keep reading

Related pages

Not sure which applies to you?

Describe the part and the joint and we will tell you which configuration fits — or whether you do not need a machine at all.