Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
Home/Solutions/EV battery and energy storage
Industry solution

Screw driving for battery pack and energy storage assembly

Battery pack assembly adds one requirement that ordinary screw driving does not have: nothing on the tool may become a conductive path or a source of foreign objects.

At a glanceTypical fastening: M4.0 – M5.0 · single- and dual-platform screw driving and dispensing cells configured per part · built in Dongguan, China since 2011

Most engineers arriving here go straight to one of these:

Industry solution

A battery pack contains a large number of screws — module clamps, busbar covers, BMS brackets, cooling-plate fixings and the enclosure lid. Sizes are typically M4.0 to M5.0 with defined torque windows, because the fasteners clamp stack-ups that must not be over-compressed. Over-torque damages the component underneath; under-torque leaves a joint that loosens under vibration. The window is narrow and the record matters.

The safety dimension changes the machine design. Any screw that is dropped inside a pack is a foreign object that can short a cell or a busbar, so the station is usually built with a contained feed path and no loose fasteners on the deck. Where the pack is live during assembly, tooling has to be considered from an insulation standpoint, and ESD control is mandatory rather than optional.

Cycle time is frequently set by the number of joints rather than by driving speed, so multi-spindle heads and multiple stations in series are common. The tightening data is then the practical quality gate: a pack is released to the next stage on the strength of its joint records, not on the strength of a visual check.

What to specify

What decides the machine for this application

These are the parameters we need from you to configure a station rather than to guess at one.

Torque window per joint

Stack-up joints need the window respected exactly — both over- and under-torque are functional failures, not just quality findings.

Foreign object control

Choose a feed arrangement where a dropped screw cannot end up inside the pack; this decides the station architecture.

ESD and insulation

Specify grounding, dissipative tooling and, for live assemblies, insulated bits and housings.

Number of joints per pack

With several hundred joints per pack, parallelism (multi-spindle or multiple stations) is usually the only way to hit takt.

Data retention

Tightening records per pack serial number, retained for the period your warranty or homologation requires.

Common questions

Frequently asked questions

How do you stop a dropped screw from ending up inside the pack?
The station is designed with a contained screw path — screws are presented at the bit and never loose on the working deck. Where a drop is still possible, the fixture is arranged so debris collects away from the cells rather than in the pack.
Is the equipment suitable for ESD-controlled areas?
Yes, with the appropriate grounding and dissipative tooling specified at order. Tell us the ESD regime you work to and we configure the station to it.
Can the machine keep up with pack takt time?
That depends on the joint count. For high joint counts we use multi-spindle heads or split the work across stations. Send the joint list and the takt target and we will model the cycle.
Keep reading

Related pages

Tell us about your joint

Send the part, the screw size and the torque window and we will come back with a configuration and a cycle-time estimate.