Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
Home/Machine selector
Free selection tool

Which machine fits your line?

At a glanceFour inputs decide the platform — process, points per unit, target output and part size. The tool returns a platform class, the travel and feed method to specify, and a published price band in US dollars.

Answer four questions and you get the platform class that fits, the travel and screw-feed or dispensing method to specify, and the price band those machines are published at. It runs in your browser; nothing is uploaded until you choose to send it.

Your application

Machine parameters behind the recommendation: screws M1.7–M5.0, repeat positioning ±0.02 mm, standard cycle time 0.37–0.41 s per screw, working range 500 × 400 × 100 mm, payload 4 kg (5 kg downward positioning), moving speed 0.1–800 mm/s.

What that points to

Points per hour needed— points / h
Platform class—
Travel to specify (X × Y × Z)—
Feed / dispensing method—
Published price band—
Stations to reach the target— stations

Price bands are the figures the machines are published at on Made-in-China.com (a snapshot of 57 listings taken in October 2026), shown as a range. They are a reference point, not a quotation — your configuration decides the actual figure. Where no comparable machine is published, the field says quote required instead of a made-up number.

Before you ask for a price

These four items are what a machine builder actually needs in order to quote. Have them ready and the answer comes back in one round instead of five.

  1. Part drawing or 3D file — shows the joint positions and access direction.
  2. Screw or material specification — thread size and head form, or the adhesive / sealant / potting compound and its viscosity.
  3. Target cycle time and shift pattern — units per hour and hours per shift.
  4. Interfaces — whether tightening data must reach your MES, and whether the station sits inline or standalone.

Send your result to an engineer

Your selection is attached automatically. We reply with a suggested configuration and a quotation.

Published price bands

What these machines are published at

A snapshot of 57 Made-in-China.com listings taken in October 2026, grouped by process and platform class — a reference point for budgeting, not a quotation for your configuration.

ProcessBench-top single station Floor-standing / dual platformInline or custom line
Screw driving / lockingUS$4,800 – 5,300 US$9,350 – 14,500US$27,550 and up
Dispensing (glue, sealant, potting, UV)US$2,500 – 5,000 US$5,850 – 8,550Quote required
Automatic solderingUS$5,000 – 5,800 US$8,550 – 22,000Quote required
LabelingUS$12,650 – 13,000 US$12,650 – 13,000Quote required

Source: the figures these machines are listed at on Made-in-China.com (snapshot of 57 listings, October 2026). The configuration you order decides the actual figure. Where no comparable machine is published, the table says quote required instead of a number we cannot support.