Automatic screw driving & non-standard automation equipment — Manufacturer since 2011
CB CBZINChengbo Intelligent Technology
Home/Markets/Canada
Market & supply

Supplying automatic screw driving machines to Canada

Canada shares the US frequency issue and adds its own approval expectation: provincial electrical authorities look for CSA or cUL recognised components.

At a glanceBuild: 120 / 208 / 600 V, 60 Hz · Conformity: cUL / CSA-recognised components · Region: North America

Most engineers arriving here go straight to one of these:

Market & supply

Like the US, Canadian industrial supply is 60 Hz, and the common single-phase supply in a plant is 208 V or 240 V. Our machines are built for AC 220 V 50 Hz as standard, so a Canadian order is normally specified as a 60 Hz build with the transformer and control parameters matched to the actual supply at the machine position.

The approval picture is slightly different from the US. Rather than a single federal mark, provincial electrical authorities generally expect components that carry a recognised certification — CSA or cUL — and an inspection may be carried out by the local authority having jurisdiction. When you ask us for certification documents, it is worth telling us which province the machine is going to, so we supply the paperwork that is actually relevant.

Shipping to Canada from Dongguan is routine, with delivery to Vancouver or Montreal and onward transport by road or rail. As with the US, machines are pre-programmed to your part before shipment and standard applications are commissioned remotely. Bilingual documentation is available for Quebec installations on request.

What to specify

What to confirm before you order

Market-specific details that change the build, the paperwork or the logistics — settle these at enquiry stage.

60 Hz build

Same requirement as the US, and the same recommendation: specify it at order rather than convert on site.

Province of installation

Provincial requirements vary. Tell us where the machine is going so the certification documents supplied are the right ones.

Component approvals

CSA or cUL recognised electrical components rather than CE-only parts.

Bilingual documentation

French documentation is available for Quebec installations on request.

Inland transport

Port arrival is only part of the route; agree who arranges the inland leg and who pays the duty and brokerage.

Common questions

Frequently asked questions

Do Canadian installations need CSA rather than CE?
CE alone is not what a provincial inspection is looking for. The practical requirement is electrical components with a recognised certification, and the authority having jurisdiction may inspect on installation. We will supply the relevant documents for the province concerned.
Is the machine built differently for Canada than for the US?
Electrically the requirement is the same — 60 Hz, matched to the plant voltage. The difference is mainly in the certification documentation rather than the hardware.
Can you deliver to a Canadian address rather than a port?
We can ship and quote to the port; the inland leg and clearance are normally arranged by the buyer's broker. Tell us the destination and we will be specific about where our responsibility ends.
Keep reading

Related pages

Not sure which applies to you?

Describe the part and the joint and we will tell you which configuration fits — or whether you do not need a machine at all.